Properties
Top  Previous  Next

ActiveGeni properties are divided into several categories and can be modified in a Property Window of your development environment, or in ActiveGeni property pages.


Geni Source Category


Camera
Returns or sets the index of the currently selected camera
Privilege
Selects or returns the level of the camera control privelege
Acquire
Enables/disables the continuous acquisition mode
Timeout
Returns or sets the frame acquisition timeout in seconds
AcquisitionMode
Returns or sets the acquisition mode of the currently selected camera
AcquisitionFrameCount
Returns or sets the number of frames for the multi-acquisition mode
TriggerSelector
Returns or sets the configuration of a trigger signal
Trigger
Enables/disables the currently selected trigger
TriggerSource
Returns or sets the signal source for the selected trigger
TriggerActivation
Returns or sets the activation mode for the selected trigger
TriggerDelayAbs
Returns or sets the absolute value of the trigger delay for the selected trigger
TriggerDelayRaw
Returns or sets the relative value of the trigger delay for the selected trigger


Geni Format Category

Format
Returns or sets the currently selected pixel format
AcquisitionFrameRateAbs
Returns or sets the absolute value of the camera frame rate in Hz
AcquisitionFrameRateRaw
Returns or sets the relative value of the camera frame rate
SizeX
Returns or sets the width of the partial scan window
SizeY
Returns or sets the height of the partial scan window
OffsetX
Returns or sets the horizontal offset of the partial scan window
OffsetY
Returns or sets the vertical offset of the partial scan window
BinningX
Returns or sets the number of horizontal photo-cells to be combined together
BinningY
Returns or sets the number of vertical photo-cells to be combined together
DecimationX
Returns or sets the horizontal subsampling of the image
DecimationY
Returns or sets the vertical subsampling of the image


GigE Analog Category

ExposureMode
Returns or sets the operation mode of the exposure
ExposureTimeAbs
Returns or sets the exposure time in microseconds
ExposureTimeRaw
Returns or sets the exposure time in relative units
ExposureAuto
Returns or sets the automatic exposure mode
GainSelector
Returns or sets the channel to be configured by the gain adjustments
GainAbs
Returns or sets the camera's gain in absolute units
GainRaw
Returns or sets the camera's gain in relative units
GainAuto
Returns or sets the automatic gain mode
BlackLevelSelector
Returns or sets the channel to be configured by the black level adjustments
BlackLevelAbs
Returns or sets the camera's black level in absolute units
BlackLevelRaw
Returns or sets the camera's black level in relative units
BlackLevelAuto
Returns or sets the automatic black level mode
BalanceRatioSelector
Returns or sets the channel to be configured by the balance ratio adjustment
BalanceRatioAbs
Returns or sets the balance ratio of the selected component in absolute units
BalanceRatioRaw
Returns or sets the balance ratio of the selected component in relative units
BalanceWhiteAuto
Returns or sets the automatic white balance mode
Gamma
Returns or sets the camera's gamma value


Geni Input/Output Category

LineSelector
Returns or sets the physical I/O line to configure
LineMode
Returns or sets the input or output mode of the selected line
LineSource
Returns or sets the signal source for the selected line
LineFormat
Returns or sets the electrical format for the selected line
LineInverter
Returns or sets the inverted state for the selected line
UserOutputSelector
Selects the bit of the User Output register to be set
UserOutputValue
Returns or sets the value of the selected bit of the User Output register
UserSetSelector
Returns or assigns the user set to load, save or configure


GigE Display Category

BackColor
Returns or sets the background color of the control window
Display
Enables/disables automatic live display in the control window
AntiTearing
Enables/disables the anti-tearing feature for the live video display
MonitorSync
Enables/disables the monitor synchronization mode
Edge
Enables/disables the 3D look of the control window
ScrollBars
Enables/disables the scroll bars in the control window
ScrollX
Returns or sets the current horizontal scroll position for the video window
ScrollY
Returns or sets the current vertical scroll position for the video window
Flip
Flips the image horizontally or/and vertically
Rotate
Rotates the image at the specified angle
Bayer
Enables/disable the Bayer conversion and selects the conversion method
Palette
Returns or sets the number of the current live video palette
Magnification
Returns or sets the magnification factor for the live video display
Font
Returns or sets the font for drawing text in the image
Overlay
Enables/disables the overlay
OverlayColor
Returns or sets the color of the overlay graphics
OverlayFont
Returns or sets the font for drawing text in the overlay
Alpha
Shows/hides the alpha plane over the live video
BkgName
Returns or sets the name prefix for background data
BkgCorrect
Returns or sets the background correction mode
HotPixelCorrect
Enables/disables the hot pixel correction mode
HotPixelLevel
Returns or sets the threshold level to be used in the hot pixel correction mode
Integrate
Enables/disables the frame integration operation and selects the integration mode
IntegrateWnd
Returns or sets the number of frames to be used in the Integrate operation
LUTMode
Enables/disables the lookup talbe operation on the video frames